BCAK Series
BCAK-TS + AKU-20LFYG
BCAK-RL + AKU-20LFYG
12G-SDI Active BNC
12G-SDI Active BNC integrating I/O interface device inside. It frees you from struggling with PCB design coping with return loss and board space.
- TECH DATA
[ BCAK ]
| Type | Model | Form | Type | Built-in | Sales unit |
|---|---|---|---|---|---|
  | BCAK-TL | Right Angle |  TX | Cable Driver | 5 pcs |
  | BCAK-RL | RX | Cable Equalizer | ||
  | BCAK-BL |  BiDi | Cable Driver & Equalizer | ||
 | BCAK-TS | Straight | TX | Cable Driver | |
  | BCAK-RS |  RX | Cable Equalizer | ||
 | BCAK-BS | BiDi | Cable Driver & Equalizer |
Key Features and Benefits
- Assembled on a PC board with SMT Card Edge Connector.
The pluggable 2-piece structure improves productivity and replaceability.
*Card Edge Connector sold separately - Supports 12G/6G/3G/HD/SD-SDI
- Reduce entire development cost as wel as development period.
- 16 mm: Minimum pitch between adjacent connectors
- Straight models can be mounted on the same board at the same height as 3G-SDI Active BNC.
- PIN control: status monitoring and mode change
- Command control for optimization and characterization
- Cable driver and equalizer with reclocker
- TX/RX/BiDi identification by insulation color
Note
Card Edge Connector NOT included.
[ SMT Card Edge Connectors ]
| Type | Model | Form | Suit for | Sales unit |
|---|---|---|---|---|
 | AKU-20LFYG | Right Angle | BCAK-TL BCAK-RL BCAK-BL | 5 pcs or (500 pcs / reel) |
 | AKU-20SFYG | Straight | BCAK-TS BCAK-RS BCAK-BS |
Key Features and Benefits
- Card Edge Connector for BCAK
- Same footprint for TX, RX and BiDi
- Applicable for reflow soldering
| Type | TX | RX | BiDi TX mode | BiDi RX mode |
|---|---|---|---|---|
| Supply Voltage | DC 2.5 V | |||
| Current Consumption | 195 mA | 125 mA | 128 mA | 115 mA |
| Operating Temperature | -40 °C to +85 °C | |||
| Output Amplitude | 800 mV | N/A | 800 mV | N/A |
| Equalization | N/A | 12G-SDI 100m over L-5.5CUHD | N/A | 12G-SDI 100m over L-5.5CUHD |
| Standards | SMPTE ST 2082-1, 2081-1, 424, 292, 259 BTA S-004C, EN 50083-9 | |||
| Weight | Right Angle: 9 g, Straight: 10 g | |||
| Right Angle | Straight | |
|---|---|---|
| Panel Hole Dim. |   t1.6 Screw: M2.6 |   t1.6 Screw: M2.6 |
| PCB Hole Dim. |   use a M2.6 screw to fix BCAK to PCB. |   use a M2.6 screw to fix BCAK to PCB. |
